GURUFOCUS.COM » STOCK LIST » Technology » Semiconductors » SCI Engineered Materials Inc (OTCPK:SCIA) » Definitions » Peter Lynch Fair Value

SCI Engineered Materials (SCI Engineered Materials) Peter Lynch Fair Value : $12.00 (As of May. 17, 2024)


View and export this data going back to . Start your Free Trial

What is SCI Engineered Materials Peter Lynch Fair Value?

Peter Lynch Fair Value applies to growing companies. The ideal range for the growth rate is between 10 - 20% a year. Peter Lynch thinks that the fair P/E value for a growth company equals its growth rate, that is PEG = 1. The earnings here is trailing twelve month (TTM) earnings. For non-bank companies, the growth rate we use is the average growth rate for EBITDA per share over the past 5 years. For Banks, the growth rate we use is the average growth rate for Book Value per share over the past 5 years. If 5-Year Growth Rate is greater than 25% a year, we use 25. If 5-Year Growth Rate is smaller than 5% a year, we do not calculate Peter Lynch Fair Value.

Here, as of today, SCI Engineered Materials's PEG is 1. SCI Engineered Materials's 5-Year TTM EBITDA Growth Rate is 25. SCI Engineered Materials's EPS without NRI for the trailing twelve months (TTM) ended in Mar. 2024 was $0.48. Therefore, the Peter Lynch Fair Value for today is $12.00.

As of today (2024-05-17), SCI Engineered Materials's share price is $5.20. SCI Engineered Materials's Peter Lynch fair value is $12.00. Therefore, SCI Engineered Materials's Price to Peter Lynch Fair Value Ratio for today is 0.43.


The historical rank and industry rank for SCI Engineered Materials's Peter Lynch Fair Value or its related term are showing as below:

SCIA' s Price-to-Peter-Lynch-Fair-Value Range Over the Past 10 Years
Min: 0.26   Med: 0.37   Max: 0.44
Current: 0.43


During the past 13 years, the highest Price to Peter Lynch Fair Value Ratio of SCI Engineered Materials was 0.44. The lowest was 0.26. And the median was 0.37.


SCIA's Price-to-Peter-Lynch-Fair-Value is ranked better than
90.43% of 324 companies
in the Semiconductors industry
Industry Median: 1.525 vs SCIA: 0.43

Note: Please don't confuse Peter Lynch Fair Value with the value reached in Peter Lynch Chart.


SCI Engineered Materials Peter Lynch Fair Value Historical Data

The historical data trend for SCI Engineered Materials's Peter Lynch Fair Value can be seen below:

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

* Premium members only.

SCI Engineered Materials Peter Lynch Fair Value Chart

SCI Engineered Materials Annual Data
Trend Dec14 Dec15 Dec16 Dec17 Dec18 Dec19 Dec20 Dec21 Dec22 Dec23
Peter Lynch Fair Value
Get a 7-Day Free Trial Premium Member Only Premium Member Only - - - 10.75 12.00

SCI Engineered Materials Quarterly Data
Jun19 Sep19 Dec19 Mar20 Jun20 Sep20 Dec20 Mar21 Jun21 Sep21 Dec21 Mar22 Jun22 Sep22 Dec22 Mar23 Jun23 Sep23 Dec23 Mar24
Peter Lynch Fair Value Get a 7-Day Free Trial Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only Premium Member Only 11.75 10.75 11.50 12.00 12.00

Competitive Comparison of SCI Engineered Materials's Peter Lynch Fair Value

For the Semiconductor Equipment & Materials subindustry, SCI Engineered Materials's Price-to-Peter-Lynch-Fair-Value, along with its competitors' market caps and Price-to-Peter-Lynch-Fair-Value data, can be viewed below:

* Competitive companies are chosen from companies within the same industry, with headquarter located in same country, with closest market capitalization; x-axis shows the market cap, and y-axis shows the term value; the bigger the dot, the larger the market cap. Note that "N/A" values will not show up in the chart.


SCI Engineered Materials's Price-to-Peter-Lynch-Fair-Value Distribution in the Semiconductors Industry

For the Semiconductors industry and Technology sector, SCI Engineered Materials's Price-to-Peter-Lynch-Fair-Value distribution charts can be found below:

* The bar in red indicates where SCI Engineered Materials's Price-to-Peter-Lynch-Fair-Value falls into.



SCI Engineered Materials Peter Lynch Fair Value Calculation

SCI Engineered Materials's Peter Lynch Fair Value for today is calculated as

Peter Lynch Fair Value=PEG Ratio*5-Year TTM EBITDA Growth Rate***EPS without NRI (TTM)
=1* 25 *0.48
=12.00

SCI Engineered Materials's EPS without NRI for the trailing twelve months (TTM) ended in Mar. 2024 adds up the quarterly data reported by the company within the most recent 12 months, which was $0.48.


* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.

** Please be aware that the 5-Year TTM EBITDA Growth Rate is calculated based on TTM data over the last 5 years. For quarterly reported companies, the TTM data adds up the quarterly data reported by the company within the most recent 12 months. For companies that report semi-annually, annually, or do not have enough quarterly data, GuruFocus uses the annual data as the TTM data.

If 5-Year Earnings Growth Rate is greater than 25% a year, we use 25.

If 5-Year Earnings Growth Rate is smaller than 5% a year, we do not calculate Peter Lynch Fair Value.

Please note that we use the 5-year average growth rate of EBITDA per share as the growth rate for non-bank companies, as EBITDA growth is subject to less manipulations than net earnings per share. For banks, we use the 5-year average growth rate of Book Value per share as the growth rate. The reason is that EBITDA is not applicable to Banks and Book value is a relative important measurement for Banks. In the calculation, PEG=1 because Peter Lynch thinks that the fair P/E ratio of the growth stock is equal to its earnings growth rate.


SCI Engineered Materials  (OTCPK:SCIA) Peter Lynch Fair Value Explanation

Peter Lynch Fair Value applies to growing companies. The ideal range for the growth rate is between 10 - 20% a year.

Peter Lynch thinks that the fair P/E value for a growth company equals its growth rate, that is PEG = 1. The earnings here is trailing twelve month (TTM) earnings. For non-bank companies, the growth rate we use is the average growth rate for EBITDA per share over the past 5 years. For Banks, the growth rate we use is the average growth rate for Book Value per share over the past 5 years.

Please don't confuse Peter Lynch Fair Value with the value reached in Peter Lynch Chart. In Peter Lynch chart, a fixed P/E ratio of 15 is used to draw the Earnings Line. Therefore the value reached has a P/E ratio of 15. But in Peter Lynch Fair Value calculation, P/E equals to the growth rate of EBITDA per share over the past 5 years, which is 25 instead of 15 in this case.

SCI Engineered Materials's Price to Peter Lynch Fair Value Ratio for today is calculated as

Price to Peter Lynch Fair Value=Share Price/Peter Lynch Fair Value
=5.20/12.00
=0.43

* For Operating Data section: All numbers are indicated by the unit behind each term and all currency related amount are in USD.
* For other sections: All numbers are in millions except for per share data, ratio, and percentage. All currency related amount are indicated in the company's associated stock exchange currency.


SCI Engineered Materials Peter Lynch Fair Value Related Terms

Thank you for viewing the detailed overview of SCI Engineered Materials's Peter Lynch Fair Value provided by GuruFocus.com. Please click on the following links to see related term pages.


SCI Engineered Materials (SCI Engineered Materials) Business Description

Traded in Other Exchanges
N/A
Address
2839 Charter Street, Columbus, OH, USA, 43228
SCI Engineered Materials Inc is a supplier and manufacturer of advanced materials for physical vapor deposition (PVD) thin-film applications. The company is focused on markets within the PVD industry including Aerospace, Automotive, Defense, Glass, Optical Coatings, and Solar. The Company develops innovative customized solutions enabling commercial success through collaboration with end users and Original Equipment Manufacturers. Its products consist of Sputtering targets, Evaporation materials, Ceramic powders, and Substrates. Additionally, it offers various services such as advanced ceramic powders, vacuum hot pressing, machining, bonding, and many more.
Executives
Laura F Shunk 10 percent owner 8300 MULBERRY ROAD, P.O. BOX 490, CHESTERLAND OH 44026
Edward W Ungar director 1145 CHESAPEAKE AVE, COLUMBUS OH 43212
Jeremiah Ray Young officer: PRESIDENT 893 THAYER DRIVE, GAHANNA OH 43230
Emily Lu director 3720 CANTERBURY CT, BOCA RATON FL 33434
John P Gilliam director 862 MOON GLOW CT, GAHANNA OH 43230
Wickersham Charles Edward Jr director 517 ARDEN RD, COLUMBUS OH 43214
Daniel Rooney director, officer: President and CEO 1145 CHESAPEAKE AVE, COLUMBUS OH 43212
Investments Sa Windcom 10 percent owner
Daniel A Funk 10 percent owner PORTER, WRIGHT, MORRIS & ARTHUR, 41 SOUTH HIGH STREET, COLUMBUS OH 43215
Michael K Barna officer: VP Sales - Photonics 1145 CHESAPEAKE AVE., COLUMBUS OH 43212
Robert H Peitz director 217 LLOYD ROAD, ABERDEEN NJ 07747
Walter J Doyle director 1970 JEWETT ROAD, POWELL OH 43065
Baker Robert J Jr director 1145 CHESAPEAKE AVE, COLUMBUS OH 43212
Curtis A Loveland 10 percent owner, officer: Secretary PORTER WRIGHT MORRIS & ARTHUR, 41 SOUTH HIGH STREET, COLUMBUS OH 43215
Scott S Campbell officer: Technical Director 1145 CHESAPEAKE AVENUE, COLUMBUS OH 43212